16493
Wiring devices / View Wireless wiring devices / IDEA / Devices
Connected actuator 16A grey
View Wireless electronic control device with NO 16 A 100-240 V~ 50/60 Hz relay output, local control with push button or remote control, double IoT technology on Bluetooth 5.0 standard for the creation of View Wireless mesh system and on Zigbee 3.0 standard, function for measuring the instant power and energy consumed and load cut-off threshold, RGB LED visible in darkness with brightness control, 100-240 V 50/60 Hz power supply, grey
Product Status
3 - Active
00. CE Marking - EU
19. NOM - Mexico
42. Zigbee certified
Question: | How many devices can I install in a Wireless system? |
---|---|
Answer: | The system allows the configuration of a maximum of 64 devices for each gateway code 14597-16497-19597-20597 |
Question: | Which App is dedicated to system configuration? |
Answer: | The system can be configured using the View Wireless App. |
Question: | How do you reset the devices? |
Answer: | Resetting is done by pressing the configuration push button for a prolonged amount of time, which must be done within 5 min of commissioning (powering) the product. |
Question: | Which function envisages the actuator device art.14593-19593-20593-16593, configured in energy monitoring mode? |
Answer: | The product allows the display of the energy consumed and the disconnection upon exceeding a given threshold which can be set by the user. |
Question: | How many Energy meters art.02963 can I install in a Wireless system? |
Answer: | Each connected system allows a maximum of 2 meters art.02963. |
Question: | Can the connected 2-way switch art.14592-19492-19592-20592 be used as a 1-way switch for a controlled socket outlet |
Answer: | No, as a minimum load of 2W is necessary for correct operation. To manage a controlled socket outlet, you can use art. 14593-16493-19593-20593 or art. 03981 |
Didn't find the answer you were looking for?
Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.