Logo Vimar payoff positivoLogo Vimar positivo

Two indep.1P NO+NO 10A pushes white - 14066

Pdf
Vimar - 14066 - Two indep.1P NO+NO 10A pushes white
Foto gallery #1
Foto gallery #2
Vimar - 14066 - Two indep.1P NO+NO 10A pushes white

14066
Wiring devices / Traditional wiring devices / PLANA / Devices

Two indep.1P NO+NO 10A pushes white
Two independent push buttons, 1P NO + 1P NO 10 A 250 V~, white. They allow the simultaneous closing of the two circuits and are thus not suitable for reversing motors (roller blinds, gates, etc.)

Product Status
3 - Active

Drawings

view encumbered art. 14066
PNG DXF
rear view art. 14066
PNG DXF
3D view art. 14066
PNG DXF
Class group
Domestic switching devices
Class
Push button
Assembly arrangement
Modular device for domestic switching devices
Model
Other
Method of operation
Push button
Number of rockers
2
Number of modules (module system)
100
Number of poles
1
Nominal voltage
250 V
Rated current
10,00 A
With lighting
No
Feedback-signal contact
No
Mounting method
Flush-mounted
Type of fastening
Engage (snap)
Material
Plastic
Material quality
Thermoplastic
Halogen free
Yes
Surface protection
Untreated
Surface finishing
Glossy
Colour
White
RAL-number (similar)
9003
Transparent
No
Label space/information surface
Yes
Suitable for degree of protection (IP)
IP40
Device width
22,30 mm
Device height
49,00 mm
Device depth
38,50 mm

00. CE Marking - EU

01. IMQ - Italy

14. TSE - Turkey

15. CCC - China

19. NOM - Mexico

20. IQC - Argentina

28. NSW - Australia

29. QCERT - Colombia

31. TISI - Thailand

37. Marking - Morocco

92. RoHS UAE

96. Electrotechnical expert

99. WEEE Directive

Minimum order quantity: 20 NR

Barcode

Barcode Qty 1 NR
8007352117334
1 NR
4.1x2.8x5.3 [cm]
32.59 [g]
Barcode Qty 20 NR
8007352117341
20 NR
21.4x11.6x6 [cm]
706.6 [g]
Barcode Qty 200 NR
8007352626027
200 NR
30.5x25.5x22.5 [cm]
7,440 [g]

Share

Codice QR scheda articolo

Legal

Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.