Logo Vimar payoff positivoLogo Vimar positivo

Domotic touch-thermostat 2M white - 02951.B

Pdf
Vimar - 02951.B - Domotic touch-thermostat 2M white
Foto gallery #1
Foto gallery #2
Vimar - 02951.B - Domotic touch-thermostat 2M white

02951.B
Smart systems&products / By-me Plus / Shared components / Devices

Domotic touch-thermostat 2M white
Touchscreen home automation system thermostat for ambient temperature control (heating and air-conditioning), 2 and 4 pipe system management, 3-speed and proportional fan-coil control, class I temperature control device (contribution 1%) in ON/OFF mode, class IV (contribution 2%) in PID mode, 1 input for flush-mounting or wired NTC temperature sensor, RGB LED backlighting, can be interfaced with actuator with proportional analogue outputs 01466 to make a class V modulating room thermostat (contribution 3%), to be completed with Eikon, Arké or Plana cover plates, white - 2 modules

Product Status
2 - Will be discontinued

Class group
Installation bus systems
Class
Room temperature controller for bus system
Bus system KNX
No
Bus system KNX-RF (Radio Frequent)
No
Bus system radio frequent
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
Other
Radio frequent bidirectional
No
Assembly arrangement
Basic element
Mounting method
Flush-mounted
With local operation
Yes
With anti-theft/dismantling protection
No
With LED indication
No
With display
Yes
Material
Plastic
Material quality
Other
Surface finishing
Glossy
Colour
White
RAL-number (similar)
9016
Transparent
No
Manual set point setting
Yes
Presence button
No
Parallel-service possible
No
Degree of protection (IP)
IP40
With bus connection
Yes

00. CE Marking - EU

37. Marking - Morocco

92. RoHS UAE

96. Electrotechnical expert

99. WEEE Directive

Minimum order quantity: 1 NR

Barcode

Barcode Qty 1 NR
8007352512672
1 NR
11.2x9.6x9.8 [cm]
129.5 [g]
Barcode Qty 18 NR
8007352671171
18 NR
37.5x30x21 [cm]
2,750 [g]

Share

Codice QR scheda articolo

Legal

Vimar reserves the right to change at any time and without notice the characteristics of the products reported. Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. For the terms of use of the information on the product info sheet see Conditions of Use.